Hangs between crane and load
The 110ES-WL wireless crane scale hangs on your crane hook. Your load hangs below, giving you a precise measurement of the load weight. It’s waterproof and salt water proof. You have a choice of two wireless digital indicators, depending on your needs.
- Enclosure Material: Stainless steel casting.
- Add your own hook and shackle – or we can provide these.
- Accuracy: 1:6,000 maximum divisions.
- Capacities: 1t, 2.5t, 5t, 10t, 20t, 30t, 50t, 100t.
- Safe Overload: 200% of full scale.
- Breaking Overload: 400% of full scale.
- IP Rating: IP68/IP69K.
- Frequencies: 433 Mhz, 915 Mhz.
- Transmission range: up to 30 m (100 ft) line of sight.
- Salt water proof power switch with indicating light.
- Salt water proof battery cap.
- Antenna protected by silicon enclosure.
Wireless Indicator
The 80HP-WL indicator gives you wireless reception from the crane. Distance up to 30 m (100 ft) line of sight.
The 805HP-WL wireless digital indicator has an IP65 ABS wash down enclosure. Consequently, it is ideal for use with the 110ES-WL wireless crane scale.
- 3xAA alkaline batteries works up to 100 hours on 20°C at the lowest power setting
- Material: ABS
- IP Rating: IP65
- LCD 6-digit display with LED backlight
- Non-volatile memory for reliable data saving
- Units of Measurement: kg, g, t, lb, Klb, N, kN, oz, user-defined unit
- Configurable 2 set-points for precaution and warning
- User-selectable display interval
- Overloading recording
- 10 user-selectable analog-to-digital converting frequency
- Weight calibration and digital calibration
- User-selectable auto power-off and power-saving timing
- Functions:Auto-Zero Tracking, Auto-Zero, Manual-Zero, Hold, Peak-Hold, TARE