The high pressure pump unit, 1000 psi pressure at full flow of 20 gpm to suit all concrete mixers up to 12000/8000 (10.5 yd) size and many other applcations. The reservoir is sized for a full wash cycle with automatic refill and low-water pump shutoff. Coupled with Scale-Tron’s control unit, the complete system is a highly effective, reliable and flexible solution that automatically cleans all types of mixer. The video explains how it cleans so effectively and how it can pay for itself in a short time. Composite image at right shows typical installation in a planetary mixer.
To see the LC200 head, our smallest with only 3 jets, in operation at our shipping dock, Click here. Positioned near a 5 year buildup of road dirt and grit, watch how each sweep of the jet cuts a path right through it. It can do the same with the concrete buildup on your mixer floor, paddles and walls or dough buildup in food mixers.
After: Three LC200 heads have done their job. 80 gallons at 1000 psi as the mixer is running give a thorough cleaning cycle. All surfaces have been covered with the LC200's rotating action, leaving the mixer like new.
|Our High Pressure Washout gives tremendous performance and it saves 1/2 hour every day. The hand cleanup gun is a powerful tool. Buzz Morgan, Lindsay precast. December 2015|
Dimensions: 40” W x 28”D x 60” H with reservoir.
Reservoir – 150 gal cylindrical polyethylene, 28” x 56” H with high/refill/low sensors and solenoid filling valve.
Hand wash gun – high flow, high power, heavy-duty gun, suitable for blasting hard-to-reach deposits off mixer surfaces and general clean-up work, supplied with 20 ft hose.
Power – specify 380 or 415V 50 Hz, 480 V or 575 V 60 Hz 3-phase when ordering.
Control system – Internal PLC gives the ultimate in functionality, allowing manual operation, timed wash cycle or remote control from batching controller. When used as concrete inter-batch wash, water can be timed or metered and used in subsequent batch.